null

This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our products and services, assist with our promotional and marketing efforts, and provide content from third parties.

eMMOTION Audi A3/S3 8V Lowering Spring Kit

eMMOTION Audi A3/S3 8V Lowering Spring Kit

(No reviews yet) Write a Review
£300.00
SKU:
EMD-AUD-LS
Type:
Spring Kits

Need Some Advice? Speak to one of our experts.

Are you looking to lower your 8V A3 or S3, but are concerned with diminished ride quality? Designed with the daily driver in mind, eMMOTION lowering springs by Emmanuele Design will provide the improved aesthetics of a lowered vehicle, without creating the harsh, bouncy ride that is all too common with typical lowering springs.
 
Taking our experience on the MQB platform, along with testing on our in-house S3 and MK7 GTI, we have developed what we feel is the best lowering spring option for those wishing to utilize factory dampers. Using a linear design (similar to OEM) with unique spring rates, our lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. 
 
Each spring set is 100% made in the USA exclusively for Emmanuele Design. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder coated with a stealth black finish for an OEM appearance. The use of high tensile chrome silicon, as opposed to typical commercial grade chrome silicon, allows us to create a lighter spring that can sustain repeated deflection without deformation. High tensile chrome silicone will typically have thinner coil diameters that are spaced further apart, when compared to commercial chrome silicon.
 
Lowering Spec
 
Audi S3 (With Magnetic Ride): Approximately 0.5" Front & Rear 
Audi S3 (Without Magnetic Ride): Approximately 0.75" Front & Rear 
Audi A3 (Without Sport Package): Approximately 1.75" Front & Rear
 
Reviews
 
"Having come from progressive springs with about the same ride height, I can certainly and immediately tell a difference in comfort and drivability." Jon M. 

"The ride comfort is at or above stock." Lee N.

"These springs are a must have. Better feel and handling than stock, yet more comfortable. That's a win in my book." Harith A.

"The car sits perfect and performs like it should have from the factory." - Steve B.
"The car is more planted and settled and greatly reduced bounce/pogo at the rear over bumps." Ian F.
 
"I am extremely pleased to be off my H&R's and on ED's springs." Jon C.
 
FAQ’s
 
Are these springs compatible with magnetic ride control?
Yes, these springs are compatible with magnetic ride control. They pair extremely well with the adjustable dampening, as they maintain the distinct ride characteristics between the different modes.
 
Are these springs okay for a daily driver?
Yes, these springs were specifically designed for daily driven vehicles. They were designed to maintain the factory ride quality.
 
Will lowering springs cause my factory shocks and struts to wear out prematurely?
Our springs are a linear rate design, similar to the OEM units. As such, they are not expected to cause additional wear on the shocks and struts. The spring heights are also designed to stay within the travel range of the factory shocks and struts to ensure longevity of the factory components.
 
Will there be any rubbing with these springs?
With most wheel and tire setups, there will be no rubbing. We typically recommend a 19x8.5 ET35 wheel for a flush fit without rubbing. We have some customers running up to a 19x9 ET40 with a 255 series tire, with little to no reported rubbing.
 
Do I need to trim the bump stops?
The bump stops do not need to be trimmed on the S3. On the A3, we recommend trimming them 0.5" front and rear.
 
What do the rear plastic pads do?
Our reverse rake adapter pads offer some adjustability of the body line of the car. For a level body line, we recommend not installing the rear pads. For an even tire to fender gap (and a slight forward rake body line), we recommend installing the rear pads. The pads go on top of the rear rubber pad, against the body.
 
Install Guide
 
Watch HERE.

Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Ecotune do not assume responsibility for the use of this part on public roads in the UK or abroad where emissions controls have been removed. It is the customer’s responsibility to ensure compliance with the rules and laws of the area of use. We would like to advise that it is illegal to remove any emission control devices or increase the exhaust noise limit on vehicles permitted to drive on public roads in the UK and most other countries around the world. Please check the rules and laws relating to this in your country. Any parts supplied or work carried out by Ecotune are strictly for off-road use and may fail an MOT test. This means that we cannot accept any responsibility for vehicles being driven on public roads where removal of emission control devices is prohibited. If you carry out this work at our premises, we would not be able to road test afterwards..

Related Products

Contact & Phone Orders

Ecotune UK Ltd.
Unit 10, 36 Dalziel Road,
Hillington Park Industrial Estate,
Glasgow,
G52 4NN
Call us: 0141 882 4669

Shop with Confidence

SagePay & PayPal Payments

Klarna Available

Top